SIMPLIFIED APHROMETER
Our simplified Aphrometer will allow you to check the pressure and the vacuum in the bottles of any still wine. With its sting, the aphrometer can pierce any regular corks and some synthetics corks.
Our simplified Aphrometer will allow you to check the pressure and the vacuum in the bottles of any still wine. With its sting, the aphrometer can pierce any regular corks and some synthetics corks.
Seaming quality is critical and important for can inspection. And it’s the one of the most concerned point for can, beverage and food manufacturing companies. AT2E SeamCheck Automatic Double Seam Projector provides the most convenient way to accomplish the seam inspection.
Using with AT2E seam saw, a clear seam section image could be obtained. Along with professional SeamCheck software, a fast and accurate seam measurement could be done.
The AT2E Stress Crack Tester is designed to test the internal stress in bottle base and for determining the stress crack resistance of blow-molded PET carbonated soft drink bottles by measuring the propensity for base cracking upon exposure to an aqueous sodium hydroxide solution under a controlled environment, so that to estimate the long term behavior of bottles.
The AT2E SCT-D Stress Crack Tester is designed to test the internal stress in bottle base and for determining the stress crack resistance of blow-molded PET carbonated soft drink bottles by measuring the propensity for base cracking upon exposure to an aqueous sodium hydroxide solution under a controlled environment, so that to estimate the long term behavior of bottles.
“PVG-P” is the portable model for measuring pressure or vacuum into bottle.
Install the PVG-P under the finish neck and adjust the needle on the cap’s center, then screw the nut.
The needle will pierce the cap without leakage and check the pressure or vacuum value.
The “PVG” is used to measure pressure or vacuum of can or bottle.
Simply place the sample under the entity manometer or vacuum meter and lower the lever. Then read the value.
PTG-D PTG Preform Thickness Gauge is used to measure the preform thickness. It’s easy to operate and applicable for various sizes of preform (various supports for different sizes of preform). PTG-A (Analogic indicator) DescriptionPhotosDescription Technical specifications: Measuring range: 0-10mm Accuracy: 0.01mm Dimension: 245(L) x 120(W) x 125(H) mm Weight: 2.4kg Photos
PTG -1 Plate Thickness Gauge is for quick checking of the thickness of plates.
Easy-operation design offers a fast and accurate measurement of the plate thickness.
Many typical laboratory functions have been expanded to include a clear graphics screen, which shows the relevant information visually and makes it significantly easier to operate and read the weights off the display Navigation pad for super quick navigation through the menus 40 memories for each mode Extensive print formats – up to 20 lines
Comply with the requirements of FDA – CFR 21-11