The BTLT-1 is an instrument for testing the resistance to Top load effort on glass containers. It has been widely used by the glass container manufacturers and users. As a standard testing instrument for the glass container industry, it offers an important technical reference to the manufacturers for maintaining or improving the product quality and performance.
DescriptionPhotosDescription Bottle Tilt Tester is a standard equipment to measure and evaluate the bottles resistance to tilt Mainly used by glass, beverages, pharmaceutical, cosmetic industries. BTT-1 is friendly use with is touch screen control to start test, adjust tilt angle, and speed. BTT-1 automatically detects falls during test. It’s equipped with non-contact visual sensors. Breaking…
BWCS-A Bottle Weight Control System is an automatic system for controlling the bottle weight of crown capped products. It is able to auto measure the gross weight of the samples then measure the net weight of the bottles after they were emptied. Multi-position design, higher efficiency and better repeatability. Measure data can be sent out…
This unit is used to get a rapid and accurate measure of angle α (see photo above) of the crown cap.
Used for testing the air-tightness of the crown cap. Stainless steel design ensures the durability of the tester during test.
Cap the crown cap on the neck of the bottle mold, plunge the cap in the water tank, then increase the internal pressure and observe if there are air bubbles coming out, so that to test the air tightness of the caps.
The AT2E CEBT-1 Can and End Buckle Tester was designed for testing the pressure resistance performance of the can dome and ends, it can also perform the missile test for ends. Full automated design, just press the start button after the sample was placed, then the test process will be accomplished automatically and results…
CET-1 Cork Extraction Tester is a force test system. It has been designed for wine producer and cork manufacturing industries. Easy to use, it allows to measure cork extraction or insertion and permits to improve the cork products and assembly/sealing process.
CET-1 ensures a repeatedly and accurate measure to check the push-in or pull-off force necessary to insert or extract the cork from bottles.
This is a standard test to ensure the Cork manufacturer or wine producer to let the end consumer open easily the bottle. It also allows to maintain the wine quality.
CG-D Countersink Gauge is a digital gauge for measuring countersink depth of can and end. For fast and easy measurement, the zeroization base is equipped.
In order to avoid the manual recording error, the gauge can be connected to “SPC” system or AT2E “SeamCheck” software with DTB-1 Data Transporting Box and cable. So that, the data can be transferred to “SPC” system or “SeamCheck” software through DTB-1 and ca
DescriptionPicturesDescription CHG – Contact Height Gauge is specifically designed for measuring the contact height of aerosol cans with 25.4mm (1”) aperture. Adopted with Mitutoyo indicator, available for analog model (CHG-A) and digital model (CHG-D). Reference standards: EN 14850, EN 14847, EN 15006 Technical specifications: Measure range: 3 – 5 mm Resolution: 0.01 mm Sample…
The CIDG-1 Can Internal Diameter Gauge is for quick checking the internal diameter of necked-in cans. For each diameter, a corresponding calibration block will be supplied along with the gauge.
It can be custom made to compatible for different can sizes in one gauge. Please specify when inquiring.
