TORQUE CHECK
Handheld Torque Controller
Technical characteristics :
·Use via digital screen.
· Screwing and unscrewing measurements
· Measuring range: from 00.00 to 60.00 Kgf.cm
· 2 measurement modes (continuous, peak).
· Units: Kgf.cm / Inch.lbs / Nm / N.cm.
· Accuracy: ±0.5% of full scale.
· USB charging (PC)
· Delivered calibrated COFRAC certificate
· Transport case
· 110/240 V - 50/60 Hz
· Production of custom formats / IP 64.
· Built-in 3H battery
· Weight 0.5 kg
Options:
Use :
· Installs directly under the screw head, on a torque meter or on a plug.
· Allows you to control the screw heads.
· No disassembly required!!
Description :
TORQUE CHECK was developed to allow operators to check the screwing or unscrewing torques, metrology managers to simply and quickly check the accuracy of their torque measuring device and maintenance to check the settings of the torque heads. screwing without dismantling
Easy to use, simply install the TORQUE CHECK on the element to be checked and turn in the screwing or unscrewing direction
CALIBRATION PACK
BT ETA TORQUE ECO
BT ETA COUPLE
ADATMV5 S
ADATMV5
.jpg)
ADATMV ECO
TMV8
TMV ECO
TMV7
