ECDG-1 End Curl Diameter Gauge is for quick measure of the Curl Diameter of ends.
Easy-operation design offers a fast and accurate measurement of the Curl Diameter. For each end type, a corresponding calibration block will be supplied along with the gauge.
FWG-1 Flange Width Gauge is used to measure the flange width of empty cans.
Easy-operation design offers a fast and accurate measurement of flange width.
CG-D Countersink Gauge is a digital gauge for measuring countersink depth of can and end. For fast and easy measurement, the zeroization base is equipped.
In order to avoid the manual recording error, the gauge can be connected to “SPC” system or AT2E “SeamCheck” software with DTB-1 Data Transporting Box and cable. So that, the data can be transferred to “SPC” system or “SeamCheck” software through DTB-1 and ca
The CIDG-1 Can Internal Diameter Gauge is for quick checking the internal diameter of necked-in cans. For each diameter, a corresponding calibration block will be supplied along with the gauge.
It can be custom made to compatible for different can sizes in one gauge. Please specify when inquiring.
STG-1 Seam thickness gauge is used to measure the Seam thickness of cans.
Easy-operation design offers a fast and accurate measurement of seam thickness.
With measure angle compensation and adjusted center measure point, the can could be auto-positioned in the center easily during measuring. The gauge is applicable for different kinds of cans.
SS-1 Seaming Cutting Saw is a specially designed saw for seam cutting purpose. Equipped with linear guide rail, cans’ moving during cutting will be very precise and accurate in track. Comparing to typical seam saw, a clearer seam section will be obtained.
The Antinoise Seaming Cutting Saw is a saw with a noise resistant design and a double blade for double seaming inspections. It has been specially designed for 2-pcs can and 3-pcs can (65 mm diameter or less).
It can apply a speed of 1450 rev/min which enables the use of this saw on very simple cutting surfaces.
Seaming quality is critical and important for can inspection. And it’s the one of the most concerned point for can, beverage and food manufacturing companies. AT2E SeamCheck Automatic Double Seam Projector provides the most convenient way to accomplish the seam inspection.
Using with AT2E seam saw, a clear seam section image could be obtained. Along with professional SeamCheck software, a fast and accurate seam measurement could be done.